AO+: The Safest Ampoule Opener Ever

The AO+ is a next generation ampoule opener, which requires no user contact with the glass ampoule during and after opening – thereby virtually eliminating sharps injuries. AO+ in addition helps prevent needle stick injury with its optional needle holding tower in the safety base system which is part of the AO+ system. Each AO+ is made to suit the individual size of an ampoule to ensure a clean break and your ultimate protection.

We manufacture AOP openers presently for the complete range of DIN ISO 9187 Ampoules, USA Wheaton ampoules and our growing number of models in the AOP MODEL LIBRARY : Drugs & Cosmetics and AOP MODEL LIBRARY : Reagents & Analytics.

AO+ is a two part system incorporating a safety holding/mounting base and a sealed opening chamber- the opener. The base is designed to hold the ampoule in a port safely at all times where the ampoule cannot fall over. In addition the base is designed to catch the opened neck in another port. This allows easy disposal of both the empty ampoule and neck in one simple action into a sharps container after all procedures have been completed. A needle cap holding system is an additional option that can be ordered for incorporation on the safety base. This is designed to hold the needle cap or needle vertically so it is easy to reinstall the cap or needle to prevent needle stick injury occurances.

AO+ is available in different configurations of single, double, tripple base holding capacitities and other custom designs to suit your procedural needs. AO+ can be made with a single size opener on it or dual types: like a 1 ml and 5 ml or other sizing needs. AO+ can be easily built to your specific sized ampoules within our fast custom manufacture abilities at Low cost and short turn around time of 72 hours.

Custom Orders: To Custom Make an AOP for your ampoule, we need: Preferred. 1. Samples of your ampoule/s sent to us. We require a minimum of 2-6 ampoules of each type shipped to our SHIPPING ADDRESS. Note: Your shipping fees will be refunded from your first order. Or 2. Accurate measurements of your ampoule/s per our instructions: MEASURING YOUR AMPOULE/S. OR The manufacturer specifications of the ampoule/s and 3. Photos of your ampoule/s. OR 4. The manufacturer specifications of the ampoule/s.
This information as well as any special design needs and procedural requirement/s can be supplied to CUSTOM ORDERING.

Selection of your AO+ is easy. If you know your ampoule type and size, scroll down the page to step 1. and select your type of ampoule from our model range buttons.

If you are not sure about your ampoule and do not know what type and size it is. Click one of the buttons for help identifying your ampoule. Then go back to find your type of corresponding opener or Custom orders of either AO+.

If you cannot find your type and size of ampoule in our existing model range, we can quickly make an AO+ to suit your ampoule.

If you want a custom made AO+ opening system go to CUSTOM ORDERS and send us your information.

Need help Identifying your ampoule? Click Here!

Quick Links

Detailed Specifications & Videos
Product & Packaging Customizations
Brochures & Documents
International & Distributor Orders

(click the video above to see the longer version of AOP promo video)

(click the video above to see the needle stick prevention and AOP)

(click the video above to see the Varied models of AOP)

STEP 1: Know your size and type of ampoule, Select a button from our range.

Select from the buttons below for our existing model range of openers.

Standard DIN type:AO+ units made to suit DIN ISO 9187 European standard ampoules from 1 – 20 ml ampoule sizes. Don’t know what a DIN ampoule is? Click following to discover more. What are DIN AMPOULES?.
Ergonomic DIN design: AO+ units made with an Angled ergonomic base design for full range of DIN ampoules. Designed to reduce stress injury from removing compounds from opened ampoules.
Wheaton ampoules: AO+ units made to suit USA manufacturer Wheaton range of ampoules from 1-20 mls sizes.
IH Ampoule Library: Contains the existing range of AOP opener systems made for clients around the world. It covers DRUGS and Cosmetic compounds and Analytical and Reagent materials/compounds. If you do not find your item, request a Custom AOP to be made for your needs.
Staff Training ampoules & openers: AO+ openers and our range of training ampoules with distilled water contents for use in training excercises of staff in safety procedures in opening glass ampoules and using needle and syringes to avoid needle stick injury occurances.
New custom AOP: Cannot find your ampoule type. We can make a custom AOP unit specifically for your sized ampoule/s within 4 days of receiving the measurements and or samples of your ampoule/s. Use button for greater information.

Our AOP existing model range of openers.

AOP standard DIN type

Need help selecting an ampoule opener? Click Here!

STEP 2: Need help identifying your ampoule size and type. Go here

Indentifying your ampoule DIN ampoules DIN AMPOULE SIZING CHART

DIN AOP Safety Openers.

Non-Sterile:
1mL
2mL
3mL
5mL
10mL
20mL

AO⁺ DIN: 1mL (Non-Sterile)

(click image to see actual ampoule size this AO+ Opener accommodates)

1mL Single: x1 Ampoule Post (Single) on Base plus Opener

(AOP:DIN.1.1)

Volume Discounts

1 to 3 units: AU$ 28.99 each
4 to 6 units: AU$ 27.99 each
7 to 9 units: AU$ 26.99 each
10 to 12 units: AU$ 24.99 each
13+ units: Contact Us

AU$ 28.99

STEP 1: Know your size and type of ampoule, Select a button from our range.

Select from the buttons below for our existing model range of openers.

Our AOP existing model range of openers.

Full MOSM range of calibration standards ampoules.

AOP standard DIN type

STEP 2: Need help identifying your ampoule size and type. Go here

DIN AOP Safety Openers.

AO+ DIN: 1mL (Non-Sterile)

1mL Single: x1 Ampoule Post (Single) on Base plus Opener

(AOP:DIN.1.1)

1mL Double: x2 Ampoule Posts (Double) on Base plus Opener

(AOP:DIN.1.2)

1mL Single + NH: Single Base plus Needle Holder & Opener

(AOP:DIN.1.1.n)

1mL Double + NH’s: Double Base with Needle Holders, plus Opener

(AOP:DIN.1.2.n)

AO+ DIN: 2mL (Non-Sterile)

2mL Single: x1 Ampoule Post (Single) on Base plus Opener

(AOP:DIN.2.1)

2mL Double: x2 Ampoule Posts (Double) on Base plus Opener

(AOP:DIN.2.2)

2mL Single + NH: Single Base plus Needle Holder & Opener

(AOP:DIN.2.1.n)

2mL Double + NH’s: Double Base with Needle Holders, plus Opener

(AOP:DIN.2.2.n)

AO+ DIN: 3mL (Non-Sterile)

3mL Single: x1 Ampoule Post (Single) on Base plus Opener

(AOP:DIN.3.1)

3mL Double: x2 Ampoule Posts (Double) on Base plus Opener

(AOP:DIN.3.2)

3mL Single + NH: Single Base plus Needle Holder & Opener

(AOP:DIN.3.1.n)

3mL Double + NH’s: Double Base with Needle Holders, plus Opener

(AOP:DIN.3.2.n)

AO+ DIN: 5mL (Non-Sterile)

5mL Single: x1 Ampoule Post (Single) on Base plus Opener

(AOP:DIN.5.1)

5mL Double: x2 Ampoule Posts (Double) on Base plus Opener

(AOP:DIN.5.2)

5mL Single + NH: Single Base plus Needle Holder & Opener

(AOP:DIN.5.1.n)

5mL Double + NH’s: Double Base with Needle Holders, plus Opener

(AOP:DIN.5.2.n)

AO+ DIN: 10mL (Non-Sterile)

10mL Single: x1 Ampoule Post (Single) on Base plus Opener

(AOP:DIN.10.1)

10mL Double: x2 Ampoule Posts (Double) on Base plus Opener

(AOP:DIN.10.2)

10mL Single + NH: Single Base plus Needle Holder & Opener

(AOP:DIN.10.1.n)

10mL Double + NH’s: Double Base with Needle Holders, plus Opener

(AOP:DIN.10.2.n)

AO+ DIN: 20mL (Non-Sterile)

20mL Single: x1 Ampoule Post (Single) on Base plus Opener

(AOP:DIN.20.1)

20mL Double: x2 Ampoule Posts (Double) on Base plus Opener

(AOP:DIN.20.2)

20mL Single + NH: Single Base plus Needle Holder & Opener

(AOP:DIN.20.1.n)

20mL Double + NH’s: Double Base with Needle Holders, plus Opener

(AOP:DIN.20.2.n)

Ergonomic DIN design

STEP 2: Select Ampoule Size

AO+ DIN Ergonomic Base: 1mL (Non-Sterile)

1mL Single: x1 Ampoule Post (Single) on Ergonomic Base plus Opener

AOP.E.DIN.1.1

1mL Double: x2 Ampoule Posts (Double) on Ergonomic Base plus Opener

AOP.E.DIN.1.2

1mL Single + NH: Single Ergonomic Base plus Needle Holder & Opener

AOP.E.DIN.1.1.n

1mL Double + NH’s: Double Ergonomic Base with Needle Holders, plus Opener

AOP.E.DIN.1.2.n

AO+ DIN Ergonomic Base: 2mL (Non-Sterile)

2mL Single: x1 Ampoule Post (Single) on Ergonomic Base plus Opener

AOP.E.DIN.2.1

2mL Double: x2 Ampoule Posts (Double) on Ergonomic Base plus Opener

AOP.E.DIN.2.2

2mL Single + NH: Single Ergonomic Base plus Needle Holder & Opener

AOP.E.DIN.2.1.n

2mL Double + NH’s: Double Ergonomic Base with Needle Holders, plus Opener

AO⁺ DIN: 1mL (Non-Sterile)

AO⁺ DIN: 2mL (Non-Sterile)

AO⁺ DIN: 3mL (Non-Sterile)

AO⁺ DIN: 5mL (Non-Sterile)

AO⁺ DIN: 10mL (Non-Sterile)

AO⁺ DIN: 20mL (Non-Sterile)

AO⁺ DIN Ergonomic Base: 1mL (Non-Sterile)

AO⁺ DIN Ergonomic Base: 2mL (Non-Sterile)

AO⁺ DIN Ergonomic Base: 3mL (Non-Sterile)

AO⁺ DIN Ergonomic Base: 5mL (Non-Sterile)

AO⁺ DIN Ergonomic Base: 10mL (Non-Sterile)

AO⁺ DIN Ergonomic Base: 20mL (Non-Sterile)

AO⁺ Non Sterile Wheaton: 1mL

AO⁺ Non Sterile Wheaton: 2mL

AO⁺ Non Sterile Wheaton: 5mL

AO⁺ Non Sterile Wheaton: 10mL

AO⁺ Non Sterile Wheaton: 20mL